Water is masonry's worst enemy — especially in Calgary where freeze-thaw cycles can turn minor moisture problems into major structural damage. ACL Masonry's wat...
Water is masonry's worst enemy — especially in Calgary where freeze-thaw cycles can turn minor moisture problems into major structural damage. ACL Masonry's waterproofing and sealing services provide a protective barrier that keeps your masonry dry, intact, and looking great for years to come.
Common questions about masonry waterproofing in Calgary
Masonry sealing and waterproofing in Calgary typically costs $3-$8 per square foot for surface sealers. Full waterproofing systems including membrane application and drainage start around $5,000+. The exact cost depends on wall area, product type, and preparation needed. Free quotes available.
In Calgary's harsh climate, masonry sealers typically need reapplication every 5-10 years depending on the product used and wall exposure. South and west-facing walls may need more frequent treatment. We use premium breathable sealers that last longer than hardware store products.
Breathable silane/siloxane penetrating sealers work best for Calgary's freeze-thaw cycles. They repel water while allowing moisture vapour to escape from within the masonry, preventing freeze damage. Film-forming sealers can trap moisture and actually cause more damage in cold climates.
Damaged masonry should be repaired before waterproofing. Sealing over cracks or deteriorated mortar traps moisture inside, making the problem worse. We recommend a repair-then-seal approach for the best long-term results.
Yes, waterproofing significantly reduces efflorescence (white mineral deposits on brick). Efflorescence is caused by water moving through masonry and carrying salts to the surface. Preventing water penetration stops this process at the source.